Webasto Retrofit W-bus Controllers,Modules,Interface.

Description: Webasto W-bus module S-10 Аutonomous, TT-V,TT-VEVO,TT-EVO,TT-C Heater that is also started by the Thermo Test (WTT) Diagnostic Program on the W-Bus option. W-bus module S-10, for stovesWith it, you start your stove via w-bus and it becomes autonomous.Starts when 12v is supplied.Stops when 12v is interrupted.This is handy for connecting to:-remote module-sim controller-tsk key-weekly timer, etc. An increase in digital stoves may begin. TTC-MERCEDES, TOUAREG, WV T5, MAZDA 62008, AUDI Q7, BMW TTV-WV TOURAN, PASSAT, GOLF V, CADDY, Land Rover 2006-2010). TTVEVO TTEVO 2017And other. The W-BUS S-10 module is an analog signal to digital converter based on W-Bus and is designed to work with stoves:-Thermo Top V-Thermo Top EVO-2017-Thermo Top CProtocol driven: W-BUS v1.4,v1.5,W-BUS v.3.1.(MAZDA 6 2008),W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010).W-BUS v4.1(EVO) The S-10 module activates the stove in autonomous mode without the need for the car computer. Size: 5cm/3cm Led indication:-constant light -in standby-blinking light -w bus module started Power supply: 12 v. Protection included in reverse polarity supply. W-Bus module LED indicator Dimensions: 50 x 30 mm.The set contains: W-bus module-1pcs Webasto W-bus module S-20 Autonomous TT-V,TT-VEVO,TT-EVO,TT-C For connoisseurs Heater that is also started by the Webasto Thermo Test (WTT) Diagnostic Program on the W-Bus option. W-bus module S-20, for Webasto stovesWith it, you start your stove via w-bus and it becomes autonomous.Starts when 12v is supplied.Stops when 12v is interrupted.This is handy for connecting to:-remote module-sim controller-tsk key-weekly timer, etcW-bus S-20 has an outlet for a circulation pump. Additional outputs for water pump 12v (can be used at discretion)- after stopping the stove, the water pump continues to circulate for 120 seconds An increase in digital stoves may begin. TTC-MERCEDES, TOUAREG, WV T5, MAZDA 62008 , AUDI Q7, BMW TTV-WV TOURAN, PASSAT, GOLF V, CADDY, Land Rover 2006-2010). TTVEVO TTEVO 2017and other. The W-BUS module is an analog signal to digital converter based on W-Bus and is designed to work with stoves:Webasto Thermo Top VThermo Top EVOThermo Top C.Managed with W-BUS V1.4,V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010),W-BUS v.4.1 EVO protocol, etc. The controller activates the stove in autonomous mode without the need for the car computer. Led indication:-constant light -in standby-blinking light -w bus module started Power supply: 12 v. Protection included in reverse polarity supply. W-Bus module LED indicator Dimensions: 50 x 30 mm.The set contains: W-bus module-1pcs Webasto W-bus module S-30 Clear/Erase Errors in 3 seconds Heater that is also started by the Webasto Thermo Test (WTT) Diagnostic Program on the W-Bus option. Cleans up accumulated errors without needing interfacesdiagnostics or go to a service center.-press the button for 3 seconds and the errors are cleared.Led indication:-constant light -in standby-blinking light -w bus module started W-bus module S-30, for stovesWith it, you start your stove via w-bus and it becomes autonomous.Starts when 12v is supplied.Stops when 12v is interrupted.This is handy for connecting to:-remote module-sim controller-tsk key-weekly timer, etc W-bus S-30 has an outlet for a circulation pump.Additional outputs for water pump 12v (can be used at discretion)- after stopping the stove, the water pump continues to circulate for 120 seconds An increase in digital stoves may begin. TTC-MERCEDES, TOUAREG, WV T5, MAZDA 62008 , AUDI Q7, BMW TTV-WV TOURAN, PASSAT, GOLF V, CADDY, Land Rover 2006-2010). TTVEVO TTEVO 2017and other. The W-BUS module is an analog signal to digital converter based on W-Bus and is designed to work with stoves: Thermo Top VThermo Top EVOThermo Top C.Managed with: W-BUS V1,.4,V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010) protocol,W-BUS v.4.1 EVO protocol, etc. The controller activates the stove in autonomous mode without the need for the car computer. Power supply: 12 v.Protection included in reverse polarity supply.W-Bus moduleLED indicator Dimensions: 50 x 30 mm.The set contains:W-bus module-1pcs Instruction:There is no + 12V applied to START and the RESET button is not pressed, then the LED should just light up. Error reset.If RESET is pressed for about 3 seconds, the LED flashes FAST during error clearing. And after cleaning the LED, it lights up without blinking. Enable WTT.It is necessary to supply constant voltage + 12V to START. The pump and stove will start. The LED should blink SLOWLY. If you remove the constant voltage + 12V to START, then the stove will stop and the pump will continue to work for 2 minutes. At the same time the LED should flash FAST.At the end of the work, the LED lights up continuously. W-bus Emulator S-100mini Webasto Telsestart Webasto heater that is also started by the Thermo Test (WTT) Diagnostic Program on the W-Bus option. W-bus module S-100mini, for stovesWith it, you start your stove via w-bus and it becomes autonomous.The controller is started with "On" and turned off with "Off"Remote control distance 70m(Direct visibility) The W-BUS S-100mini module is an analog signal to digital converter based on W-Bus and is designed to work with stoves:-Thermo Top V-Thermo Top EVO-2017-Thermo Top CManaged with: W-BUS V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010) protocol,W-BUS v.4.1EVO protocol, etc.Connection instructions are included in the package. The S-100mini module activates the stove in autonomous mode without the need for the car computer.Webasto W-bus controller Telsestart S-100 For connoisseurs Turn on any heater that is also started by the Webasto Thermo Test (WTT) Diagnostic Program on the W-Bus option. Large range of remote control.Direct visibility - 300mThe remote has a battery includedAdditional output 12v (can be used at discretion)The controller is started with "On" and turned off with "Off"Led indication:-constant light -in standby-blinking light -w bus controller started An increase in digital stoves may begin. TTC-MERCEDES, TOUAREG, WV T5, MAZDA 62008 , AUDI Q7, BMW TTV-WV TOURAN, PASSAT, GOLF V, CADDY, Land Rover 2006-2010). TTVEVO TTEVO 2017and other. The W-BUS Telestart S-100 controller is an analog signal to digital converter based on W-Bus and is designed to work with stoves:Webasto Thermo Top VThermo Top EVOThermo Top C Managed with W-BUS: V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010),v4.1 Evo protocol, etc. The controller activates the stove in autonomous mode without the need for the car computer. Power supply: 12 v. Protection included in reverse polarity supply. W-Bus controller LED indicator Dimensions: 100 x 55 mm.The set contains: W-bus controller-1pcs, antenna-1pcs, remote-1pcs Webasto S-200mini Start/AutoStop 30/60/Always W-bus controller Telsestart Webasto W-bus module S-200mini Webasto heater that is also started by the Webasto Thermo Test (WTT) Diagnostic Program on the W-Bus option. W-bus module S-200mini, for Webasto stoves With it, you start your stove via w-bus and it becomes autonomous.The controller starts with "HOLD for 0.5 to 3 seconds-ON" and to force stop "HOLD for 0.5 to 3 seconds" "OFF"S-200mini has three modes of selection:(30 minutes, 60 minutes, always)After the time expires(30/60), the controller turns off.In "Always" position, the controller will work continuously until you stop it manually, by pressing Off (from 0.5 to 3 seconds)To select a mode, please move the slider of the switch to the corresponding position. Remote control distance 70m(Direct visibility) The W-BUS S-200mini module is an analog signal to digital converter based on W-Bus and is designed to work with Webasto stoves:-Thermo Top V-Thermo Top EVO-2017-Thermo Top CManaged with: W-BUS V1.4,V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010) protocol,W-BUS v.4.1EVO protocol, etc. The S-200mini module activates the stove in autonomous mode without the need for the car computer. Webasto W-bus controller Telsestart S-200 Turn on any heater that is also started by the Thermo Test (WTT) Diagnostic Program on the W-Bus option. Large range of remote control.Direct visibility - 300mThe remote has a battery includedAdditional outputs for water pump 12v (can be used at discretion)- after stopping the stove, the water pump continues to circulate for 120 seconds- The stove is started with the ON button (hold for 1 second)- Telestart S-200 controller, has three working times 30 minutes, 45 minutes, 60 minutes. -After the selected time expires, the stove stops working. !!! If you want to stop the stove in advance before the selected time expires --With the OFF button, the stove is forced to stop (hold for 3 seconds) Time can be selected with a button (three positions 30min, 45min, 60min) Led indication:-constant light -in standby-blinking light -w bus controller started An increase in digital stoves may begin. TTC-MERCEDES, TOUAREG, WV T5, MAZDA 62008 , AUDI Q7, BMW TTV-WV TOURAN, PASSAT, GOLF V, CADDY, Land Rover 2006-2010). TTVEVO TTEVO 2017and other. The W-BUS Telestart S-200 controller is an analog signal to digital converter based on W-Bus and is designed to work with stoves:Webasto Thermo Top VThermo Top EVOThermo Top C. Managed with: W-BUS V1.5, W-BUS v.3.1.(MAZDA 6 2008 ), W-BUS v.3.3.(VW TOURAN, VW CADDY, GOLF V, Land Rover 2006-2010) V4.1 Evo protocol, etc. The controller activates the stove in autonomous mode without the need for the car computer. Power supply: 12 v. Protection included in reverse polarity supply. W-Bus controller LED indicator Dimensions: 100 x 55 mm.The set contains: W-bus controller-1pcs, antenna-1pcs, remote-1pcs Webasto A-100mini controller Telsestart analog out +12v Webasto W-bus module A-100mini W-bus module A-100mini, for Webasto stovesWith it, you start your stove with +12 volts and it becomes autonomous. Suitable for all Analog Stoves Thermo top C,E,Z,PBMW E39, E46, E53-X5Audi,Citroen, Peugeot, Mercedes, Rover, Fiat, etc The controller starts with "HOLD for 0.5 to 3 seconds-ON" and to force stop "HOLD for 0.5 to 3 seconds" "OFF" A-100mini has three modes of selection:(30 minutes, 60 minutes, always)After the time expires(30/60), the controller turns off.In "Always" position, the controller will work continuously until you stop it manually, by pressing Off (from 0.5 to 3 seconds) To select a mode, please move the slider of the switch to the corresponding position. Remote control distance 70m(Direct visibility) The A-100mini module activates the stove in autonomous mode without the need for the car computer. W-bus module A-100mini, for Webasto stoves With it, you start your stove with +12 volts and it becomes autonomous. Suitable for all Analog Stoves Thermo top C,E,Z,PBMW E39, E46, E53-X5Audi,Citroen, Peugeot, Mercedes, Rover, Fiat, etc The controller starts with "HOLD for 0.5 to 3 seconds-ON" and to force stop "HOLD for 0.5 to 3 seconds" "OFF" A-100mini has three modes of selection:(30 minutes, 60 minutes, always)After the time expires(30/60), the controller turns off.In "Always" position, the controller will work continuously until you stop it manually, by pressing Off (from 0.5 to 3 seconds) To select a mode, please move the slider of the switch to the corresponding position. Remote control distance 70m(Direct visibility) The A-100mini module activates the stove in autonomous mode without the need for the car computer. BMW X5 Webasto remote control Autonomous Start/AutoStop BMW X5 Webasto remote control Autonomous Start/AutoStopModule for remote ignition of the stove on X5 E53 3.0d. The installation is on the socket.I send with instructions. Fits all X5 3.0d e53 from 2002 to 2006 Module with one remote.When activated by the remote control, it turns on the stove.I send the next working day, Priority, Air, Tracking number. W-bus module A-100mini, for Webasto stovesWith it, you start your stove with +12 volts and it becomes autonomous. Suitable for all Analog Stoves Thermo top C,E,Z,PBMW E39, E46, E53-X5Audi,Citroen, Peugeot, Mercedes, Rover, Fiat, etc The controller starts with "HOLD for 0.5 to 3 seconds-ON" and to force stop "HOLD for 0.5 to 3 seconds" "OFF" A-100mini has three modes of selection:(30 minutes, 60 minutes, always)After the time expires(30/60), the controller turns off.In "Always" position, the controller will work continuously until you stop it manually, by pressing Off (from 0.5 to 3 seconds) To select a mode, please move the slider of the switch to the corresponding position. Remote control distance 70m(Direct visibility) The A-100mini module activates the stove in autonomous mode without the need for the car computer. WEBASTO v2.16 USB INTERFACE DIAGNOSTIC HEATER Thermo Test E P Z C V EVO 100%TESTED Do not wait for your stove to ignite.Perform a diagnosis and clear the errors.Do not waste time.Carry in the car if needed, make a diagnosis.Provide yourself and your children with comfort in the cold winter days. If you don't manage, I can remotely do the settings for you. The USB interface for Webasto heaters Works with 12 /24 voltage, and all Windows OSMicrocontroller in this kit is based on high quality communication chip /Texas Instruments or NEC/compatible Air Top Evolenght - 2,5m suitable for workingYou will get connection patterns for different models and instructions New Webasto software WTT v2.16.1 with extended /engeneer mod/ /see photo/The software is available on the following languages– English, Russian(Руский), Danish(Dansk), German(Deutsch), Spanish(Espanol), French(Francais), Polish(Polski), Finnish(Suomi)Functions: Read and clean formed errors Heaters parameters and operating data are displayed Graphs of actual values of components Component test (water pump, fuel pump, combustion fan, glow plug, relay) CO2 calibration Information about heater (hours of workng, model an year of manifacture, etc.)Thermo Top EVO C/E/P/S/T/V/Z/98Air Top 2000/ 2000S /2000ST /2500/3000/5000Thermo 50/90/90S/230/300/350DW 80/230/300/350 / BW 80DBW46 / BBW46TelestartIPCUW-BusThermo Top C, E, Handel, P, C/Z MB/DThermo Top C/Z BMW Thermo Top Audi Thermo Top C/Z Fiat Thermo Top PSA Thermo Top Rover Thermo Top (98) Thermo 50 (67339A), (67339B) Thermo 90 (S) Thermo 230/300/350 (E1), (E2), (SG1572) Air Top Evo 2000 Air Top Evo 3900 Air Top Evo 5500 Air Top 2000 STC RHx-100/MHx-100W-bus protocol < V3,5 DW/BW 80 DBW/BBW 46S......etc.. 1 piece. Everything in one cd disk. Webasto1 piece. Diagnostic cableEasy steps to connect and set up.I send in recommended. With tracking number Webasto Eberspacher USB Diagnostic Adapter Interface Cable + SOFTWARE WTT ,EDITH 100%TESTED Do not wait for your stove to ignite.Perform a diagnosis and clear the errors.Do not waste time.Carry in the car if needed, make a diagnosis.Provide yourself and your children with comfort in the cold winter days. If you don't manage, I can remotely do the settings for you. The USB combined interface heaters Automatic detected heaters. Don't needs switch for the different heaters. Microcontroller in this kit is based on high quality communication chip /FTDI, Renesas, Texas Instruments or NEC/ Works with 12/24 volts and all Windows OS lenght - 2,3m suitable for working EDiTH S4V4-F is a new diagnostic software for Eberspacher heaters. LED Adaptive Data Communication Line. LED indication of the Power New software WTT v3.4 and v2.16 with extended //engineer mod/ The adapter is compatible with the all models WTT v2.16 and all models on the left column of the WTT v3.4 softwarе /see photo/ Important: You'll get connection diagrams and instructions. The software is available on the following languages– English, Russian(Руский), Danish(Dansk), German(Deutsch), Spanish(Espanol), French(Francais), Polish(Polski), Finnish(Suomi) Functions: Read and clean formed errors Heaters parameters and operating data are displayed Graphs of actual values of components Component test (water pump, fuel pump, combustion fan, glow plug, relay) CO2 calibration Information about heater (hours of workng, model an year of manifacture, etc.) Webasto: Thermo Top C/E/P/S/T/V/Z/98 Air Top 2000/ 2000S /2000ST /2500/3000/5000 Thermo 50/90/90S/230/300/350 DW 80/230/300/350 / BW 80 DBW46 / BBW46 Telestart IPCU W-Bus Thermo Top C, E, Handel, P, C/Z MB/D Thermo Top C/Z BMW Thermo Top Audi Thermo Top C/Z Fiat Thermo Top PSA Thermo Top Rover Thermo Top (98) Thermo 50 (67339A), (67339B) Thermo 90 (S) Thermo 230/300/350 (E1), (E2), (SG1572) Air Top Evo 2000 Air Top Evo 3900 Air Top Evo 5500 Air Top 2000 STC RHx-100/MHx-100 W-bus protocol < V3,5 DW/BW 80 DBW/BBW 46S ...etc.. Eberspacher: Airtronic M/L B/D 1/3 C/P Compact B/D 1/3/5LC, D8LC D12W D2L, D12W D7W (D2H) D9W, Hydronic 10 Hydronic 10 M/MII, L/LII Hydronic 16/24/30/35 Hydronic B/D 3/5 WZ Hydronic B/D 4/5W SC/S Hydronic II-H/F, II, II-C Eberspacher D4WS 2123 25 05 for Volkswagen T4 only VAG-COM original diagnostic software 1 piece. Everything in one cd disk. Eberspacher Webasto(Drivers,Sheme,Picture,Instructions)1 piece. Diagnostic cableEasy steps to connect and set up. Webasto Water Pump Control Relay Delay 120sec Webasto Water Pump Control Relay Delay 120sec Suitable for all Webasto stoves, without water pump control. With power supply to the module, the water pump starts. After a power cut the water pump continues to work for 120 seconds and stops. Info Webasto and Eberspacher Scheme,Drivers,Software,Instructions,Images Info Webasto and Eberspacher Scheme,Drivers,Software,Instructions,Images 1397 files1024 folders1.99gb total For connoisseursAfter receiving the payment, I send a download link. You receive everything without waiting for a courier. Content of the download link: Drivers, installation instructions, diagnostics instructions, repair instructions, error codes, notes,sample photos. Contains a large range of models of stoves for cars, trucks, buses. Water, Air, Combined I do not accept returns (this is online download link delivery)

Price: 40 USD

Location: Plovdiv

End Time: 2024-11-29T20:34:32.000Z

Shipping Cost: 6 USD