Ultraviolet Water Steriliser Treatment System 11 W 227LPH 304SS Philips Lamp

Description: Ultraviolet Water Treatment System Features and further details: Water purification with UV lamps UV systems can be used to disinfect water in a wide variety of applications including drinking water, wastewater, process water, swimming pools and ponds. UVC radiation is known to break the DNA of bacteria, viruses and spores. As a result, they are rendered harmless. UV radiation can be used for multiple purposes in water but is primarily employed as a disinfection process that inactivates micro-organisms without chemicals. The quality of the water we drink has a profound effect on our health and well-being. Households can purify their water by installing UV water purification systems at the point of entry in the home, at the point of use (such as kitchen sink) or via separate purifiers. You can easily disinfect your rainwater & bore water before use. These UV systems are often combined with filters to remove other substances from the water (chlorine, particles). The benefits of UV disinfection are: Effective for all types of microorganisms, including bacteria, viruses, fungi, and protozoa such as Cryptosporidium and Giardia No disinfection by-products (DBPs) of health concern formed UVC acts instantly Low capital and operating cost Easy to operate and maintain Does not change the taste of water Safe and environmentally-friendly No overdose issues and the dose can be easily adapted to specific needs Features of this Ultraviolet Water Treatment System This UV Water Steriliser is designed to suit a wide range of applications such as homes and apartments, hotels and resorts, restaurants, hospitals, schools, aquaculture, laboratories, swimming pools and ponds, community water supplies, agriculture etc. The Philips TUV lamp is based on proven technology that has allowed a breakthrough in lamp life reliability. In contrast to other TUV lamps on the market, Philips TUV lamps contain two different electrodes. Because only one electrode determines the lifetime of the lamp, the causes for the spread in a lifetime are effectively halved and inherently better control of the lifetime spread is realised. As a result, the Philips TUV lamps outperform any other TUV lamp in their category on lifetime reliability. Kills 99.9% of bacteria 11 W Philips UV lamp with a lifespan of 8,700-hour 304 Stainless Steel Housing (total length: 25.5cm~) Trouble-free maintenance Quick lamp change LED operation light – which ensures you are in control 24/7 Inlet and Outlet: 1/2" male thread Water Treatment Capability: 227LPH (4~ LPM) Water Capacity: 502cm3 Maximum allowable operating pressure: 145 PSI (10 bar~) Pressure Test: 218 PSI (15 bar~) Operating Temperature: 4~40°C 220-240V to 11 W electronic Ballast User Guide 1- Unscrew the metal nuts on each end of the chamber. 2- Take the quartz sleeve out of its packaging and slide one of the two O-rings over one end of the quartz sleeve. 3- Carefully slide the quartz sleeve into the chamber via the end with no O-ring and attach the second O-ring onto the end once it is in place. Then, screw the metal nuts back onto each end of the chamber. 4- Connect the lamp connector to the pins on the lamp. Slowly insert the UV lamp provided into the chamber through the hole of the aluminium nut end and secure the safety cap on the aluminium nut end. 5- Turn the water on once your set-up is complete and let the water flow through - opening the downstream tap to flush the unit for 1-2 minutes and Visually inspect for any leaks. 6- Turn on point of use to let water flow through the unit and wait for 2-3 minutes to release air and impurities from the system. 7- Plug in the power connector with ballast and make sure that the LED is illuminated steadily to start operation. Installation should be completed by qualified tradespersons only. Important: Before attempting installation, check all components are intact and have not been damaged in transit. The UV water steriliser should be installed after any filtration or reverse osmosis systems. In a pressurised system, the chamber can be installed horizontally or vertically. Determine an installation location remembering to allow the following clearances to the side of the unit for lamp changes (lamp exit and entry point can be determined by the installer). A power outlet is required. Avoid touching the quartz (glass) sleeve and lamp surface as marks and fingerprints may interfere with UV transmission. If the lamp is soiled, please clean the lamp with an alcohol-based cleaner. Avoid turning the lamp on and off unnecessarily as this will shorten the service life of the UV lamp. Turn off power to the UV when not using the system for an extended period of time. Flush the system when turning it back on. Warning: Risk Group 3 Ultra Violet product. The UV lamp emits high-power UV radiation that can cause severe injury to the skin and eyes. Avoid eye and skin exposure to unshielded products. Use only in an enclosed environment which shields users from the radiation. Package Includes: (please select from the above variation bar) Package (1): 1x 304 Stainless Steel Housing 1x 11 W Philips UV lamp 1x Quartz (glass) Sleeve 1x Power Supply (Electronic Ballast) 2x O-Ring 2x Mounting brackets ___________________ Package (2): 1x 11 W Philips UV lamp ___________________ Package (3): 1x Quartz (glass) Sleeve _______________________________________________________________________________________________________________________________________________________________________ Product We test/examine all the products before sent out. If you experience any problems, please contact us directly and we will do our best to resolve any issues. If you are not totally happy with our product, you can return it to us within 30 days from the date of purchase. Please note that the returned item must be in its original packaging with all accessories, and in the same condition as when you received it. We will gladly refund you the total amount less the Shipping & Handling costs. Shipping We ship all orders placed before 4 pm on the same or the next business day. All items will be shipped via Australia Post unless specified otherwise. Free Shipping via Australian Post generally takes 2-6 business days. Express Delivery within Australia generally takes 1-3 business days. Local pick-up is available (only bulk orders); please contact us to arrange a time for pick-up. Cirex Pty Ltd Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond within 24 hours and do our best to help you out. We encourage our customers to contact us with any questions or concerns. We would like to be sure you are completely satisfied with your purchase.

Price: 30.95 AUD

Location: Macclesfield

End Time: 2023-10-01T16:40:08.000Z

Shipping Cost: 33.57 AUD