Radiomaster EP1 EP2 2.4G ExpressLRS ELRS Nano Long Range Receiver RX for ES24TX

Description: Radiomaster EP1 EP2 2.4G ExpressLRS ELRS Nano Long Range Receiver RX for ES24TX Series RC Airplane FPV Long Range LR4 LR7The 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.Specifications: EP1_RX Type: ISM ESP8285 MCU SX1280IMLTRT RF Module Omnidirectional antenna Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 0.42gram(without antenna) Dimension: 10mm*10mm*6mm Peak gain: 2.23dB EP2_RX Specifications: Type: ISM ESP8285 MCU SX1280IMLTRT RF Module SMD Ceramic antenna Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 0.44gram Dimension: 10mm*10mm*6mm Peak gain: 3.7dB Bind procedure: 1. Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode 2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully. 3. Receiver LED status meanings: PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(password:expresslrs) Shipping: The shipping costs to all countries are the same.Item will be shipped within 1-2 business days Items will be checked carefully before sent out.We will use air bubbles to wrap the items carefully Sales Tax: Sales Tax Depends on the import tax policy of your country. Warranty & return: For ensuring all the items are in good quality, we will test all products before the packages were sent out .30 days warranty from the purchased date. Please contact us via email before returning the defective item.Return items should include the original packaging and all accessories. Only defective product will be offered exchange. Contact us : Our office hours are : - 8:30 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday - 8:30 a.m. to 1:00 p.m. (GMT +8) of Saturday - 8:30 a.m. to 6:00 p.m. (GMT +8) of Sunday - Our office is closed on public holidays (China). We apologize for the late reply during the holidays. We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .

Price: 20.8 USD

Location: Shenzhen

End Time: 2024-02-17T05:43:36.000Z

Shipping Cost: 0 USD