Pneumatic Brake Fluid Bleeder Kit Car Air Extractor Pump Oil Bleeding Tool

Description: 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation. Pneumatic Brake Fluid Bleeder Tool Kit with 4 Master Cylinder Adapters 90-120 PSI Air Pressure for Auto Car Truck Motorcycle Use Widely suit for car truck motorcycle pickup and most vehicles Used for flushing and refilling the entire brake system with this brake fluid bleeder. Refill bottle can be held on the mouth of vehicle's brake fluid reservoir by the long screw. Clutch bleeder with hanging hook and locking trigger can hands free operation Specification: Hose Length 1-1/12 ft. Air flow 180 ltr/min (=6.4 cu.ft./min) at 90-120 psi, Adapter Sizes: 21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm, Please note: Use only DOT certified brake fluid. Please wear gloves and goggles when use. If the brake bleeder screw is not sealed well, the air will go into the transparent hose, and you will see bubbles. There are three sizes of brake bleeder screw adapters, please choose the most appropriate size adapter. Grease the brake bleeder screw if it cannot be completely sealed when use. How To Use: 1. Fill the new oil filler bottle with new oil and close the valve on the screw. Choose a right cylinder adapter to screw on the long screw of new oil filler bottle, and stuck it on the brake fluid reservoir, then open the valve. 2. Connect the vacuum pump (not included) to the waste oil bottle, and connect the black cone nipple to the vehicle bleed valve. Hook the waste oil bottle to the engine cover and use the trigger locker to hookup the trigger. 3. Open the vacuum pump to 90-120PSI for 4-5 mins, until the fresh transparent oil is sucked out from the brake bleed valve (you can observe from the transparent hose), then close the vacuum pump and brake bleed valve 4.Repeat this process on each wheel, then check the pressure of the pedal ADAPETER SIZES 21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm 4 MASTER CYLINDER ADAPTERS Made of strong plastic material. 1.25" -1.60" (32 to 41mm) 1.10" -1.45" (28 to 37mm) 0.95" -1.25" (24 to 32mm) 0.80" -1.20" (21 to 30mm) PACKAGE INCLUDED 1 x 1 L Brake and Clutch Bleeder, 1 x 0.8L Refill Container, 1 x BSP Connector, 2x Air quick plugs, 4 x Master Cylinder Reservoir Adapters(21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm). On Oct 12, 2024 at 00:15:23 PDT, seller added the following information:

Price: 15.99 USD

Location: Portland, Oregon

End Time: 2024-12-12T06:47:39.000Z

Shipping Cost: 0 USD