PLUTO+ SDR Transceiver Radio Software Defined For Gigabit Ethernet Micro SD Card

Description: PLUTO+ SDR Transceiver Radio Software Defined For Gigabit Ethernet Micro SD Card Item Descriptions:PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Notes: It is assembled and ready to use. SD card is not included in the package. Features: ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) 2 Transmit, 2 Receiving channel RF Range: 70MHZ~6GHZ Ref Clock: VCTCXO 40MHZ 0.5ppm SOC: for Zynq7010 FPGA: 28k RAM: 512M FLASH: 32M USB: 2.0, support OTG Ethernet: 1000Mb Micro SD can use to boot DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: 1 x SDR Radio PLUTO+

Price: 275 USD

Location: Dongguan

End Time: 2025-01-29T16:31:03.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Frequency Range: 70MHz-6GHz

Color: Black

MPN: Does not apply

FLASH: 32M

Brand: Unbranded

Type: Ham Radio Transceiver

ADC/DAC: AD9363

Manufacturer Warranty: 3 Years

Ethernet: 1000Mbps

Model: PLUTO+

Ref Clock: VCTCXO 40MHZ 0.5ppm

Country/Region of Manufacture: China

RAM: 512M