JAYO 1KG Water Washable 3D Printer Resin 405nm Photopolymer UV Curing LCD Beige

Description: About this item ① 【JAYO Washable Resin】JAYO fast curing 3D printer washable photopolymer resin can be cleaned directly with water instead of IPA/alcohol, easy to clean, time saving and more economical.② 【Fast curing 3D printer resin】JAYO 3D resin will be cured quickly when it absorbs 395-405nm UV light from the resin printer (or resin curing machine), which is suitable for most 2K/4K/8K resin 3D printers (LCD/DLP/SLA).③ 【Low shrinkage and high precision】 During the resin development process, JAYO engineers focus on how to reduce resin volume shrinkage during the curing process to ensure high precision and good stability.④ 【High compatibility and easy to use】JAYO engineers have tried various print settings on different brands of printers to continuously optimize the resin performance, making JAYO resin highly compatible and beginner-friendly.⑤【 Easy to clean and light odor】JAYO resin can be cleaned with isopropyl alcohol or ethanol, very easy to clean and smooth surface. The odor is relatively light, and the resin odor will dissipate quickly after printing.⑥【 Leak-proof bottle design】JAYO resin bottles have a patented leak-proof design, and the packaging process is very strict to reduce damage to the bottles during transportation and to ensure that the resin is intact.⑦【Resin storage method】 Please keep the resin away from sunlight, because sunlight contains ultraviolet rays, which can cure the photosensitive resin. Please seal it to avoid dust or moisture which can affect the printing quality. Packing Listing 1KG per Bottle of Resin Disposable funnel Notes: 1. must be shaken well before use, it is recommended to invert the resin three times back and forth, it is forbidden to use the resin in places exposed to sunlight.2. Do not take orally, keep away from children, wear gloves before use, avoid direct contact with skin, keep indoor ventilation; do not get into the eyes, if inadvertently contacted, flush with plenty of water as soon as possible, if there is discomfort, seek medical attention.3. for resin models after printing, wash the photosensitive resin with tap water instead of alcohol; printed models can be rinsed directly with a tap for 1-2 minutes, if there are more details it is recommended to use ultrasonic cleaning again for 1-2 minutes (tap water can be used inside the ultrasonic), so that the best performance can be obtained.4. Do not pour the used resin back into the unused resin in the tank, and do not leave the resin in the tank for a long time without using it (for long term use, the resin can be stored in a container sealed with cling film to prevent the resin from being contaminated and affecting the printing effect).5. Store at room temperature away from light, sunlight contains ultraviolet rays, which will cure the photosensitive resin; it is recommended to store at an ambient temperature of 15-35°C, the lower the winter temperature, the higher the resin viscosity.6. Keep sealed to avoid dust or moisture, which may affect the printing quality. On 03-Dec-2022 at 12:07:20 GMT, seller added the following information:

Price: 22.7 USD

Location: Los Angeles, California

End Time: 2025-02-08T13:05:14.000Z

Shipping Cost: 0 USD