Description: Product Description: The Plated Copper Nozzle and Heater Block are engineered for ultimate high temperature performance.Made from a special high temperature copper-alloy with a softening point of well above 500°C,and with much-increased thermal conductivity. These Copper Nozzles are perfect for high temperature applications,while working perfectly with all filaments,including PLA, ABS, PETG,TPU,PP,PC,PA,Nylon,PEEK,PEI and composite materials containting abrasive additives,such as carbon fiber,steel,wood,boron carbide,tungsten etc. The Plated Copper Nozzle and Heater Block have high temperature resistance,high thermal conductivity,non stick surface,reduced filament adhesion,nickel based electroplating is not easy to wear performance and are very suitable for high-temperature 3D printing that other nozzles cannot handle.but is particularly important at temperatures above 280°C where a silicone sock can't be used. The Heatbreak material is upgraded from the original TC4 titanium alloy to GRADE5.High quality raw material.High precision production to provide excellent thermal isolation between heater and cooling block. The Plated Copper Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking). Our Heatsink is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance which brings the high-quality HOTEND . After-sales guarantee: each defective item can be replacement for free or refund.If any question, please feel free to contact us, iU3D is committed to providing you with the best service! ▉Compatible: Compatible with CR-10SCompatible with CR-10S -S5Compatible with CR-10S -S4Compatible with CR-10Compatible with CR-10 -MINICompatible with CR-20Compatible with CR-20 PROCompatible with Ender2Compatible with Ender3Compatible with Ender 3 V2Compatible with Ender3 PROCompatible with TronXY X5SCompatible with Tevo TornadoCompatible with Alfawise U20 Recommended slicer setting: retraction speed over 80MM/Sretraction length 2.5-4MM If you are facing PLA clogging problem, please try the followings:1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"3. Reduce the retraction length. It depends on your machine setup.4. Increase the nozzle temperature by 5-10 degrees.5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.6. Make sure that there is no gap between the heatsink and the heat breaker. Packing list: MK8 Plated Copper Nozzle1.75/0.4mm x 1Titanium alloy Heatbreak 1.75MM x 1Plated Copper Heater Block x 1Aluminium Heatsink x 1Gift：Silicone socks x 1
Price: 35.98 USD
Location: Bantian Longgang District Shenzhen Ctiy
End Time: 2024-10-21T14:08:29.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: iU3D
Type: Hotend
Filament Diameter: 1.75 mm
Compatible Model: CR-10/10S / Ender 3 /V2/Pro Ender 5
