Green + Blue PLASTIGAGE - Assorted Pack of 2 + SPG-1 + SPB-1

Description: Green + Blue PLASTIGAGE - Assorted Pack of 2 + SPG-1 + SPB-1 This listing is for a pack of 2, brand new, green, , & blue PLASTIGAGE clearance indicator threads for use in measurement of clearance in automotive engine bearings. A measurement scale is printed on the included Plastigage package. The thread is composed of a compliant plastic material, and is approximately 12 inches long. Note on Clearance Sizes: Green PLASTIGAGE is suitable for clearance requirements in the range of .001-.003 inches (.025 to .076mm),, and Blue PLASTIGAGE covers .004-.009" (.102-.229mm). This listing includes (1) each of green, , and blue Plastigage. Reference on Clearance Ranges of different Plastigage Colors:Green: .001 to .003 inches (.025 to .076mm)Red: .002 to .006 inches (.051 to .152mm)Blue: .004 to .009 inches (.102 to .229mm)Yellow: .009 to .020 inches (.23 to 0.51mm) - (NOT included in this assortment) Tech Tips on Use: Remove the engine oil pan to reveal the big-end and its retaining set-screws. Remove excess oil and release the big-end shells by unscrewing the set-screws. Apply a smear of grease to the journal and small quantity of silicone release agent to the shell. Trim a length of PLASTIGAGE to fit across the journal using the grease to hold it in place. Replace the shell and tighten the set-screws to the recommended torque setting, without rotating the journal. Now remove the shell to reveal the PLASTIGAGE which will have been spread across the bearing surface as a stripe or band. Match the width of the stripe against the calibrated gauge on the package, and read the clearance. The PLASTIGAGE stripe ideally should be removed with a clean oily cloth or degreasing solvent. However, any remaining PLASTIGAGE residue left behind will simply dissolve in motor oil and will not harm the engine in any way.

Price: 12.55 USD

Location: Fountain Valley, California

End Time: 2024-02-25T03:26:02.000Z

Shipping Cost: 0 USD