BARKSDALE HEIGHT CONTROL LEVELING VALVE, 52321 SERIES~TRUCK, TRAILER, BUS 6" ARM

Description: MADE IN USANEW BARKSDALE LEVELING VALVE P/N 52321-Q285 RIDE HEIGHT LEVELING VALVE FOR TRUCKS, RV, TRAILERS ARM LENGTH - 6"PORTS ARE 1/4"NPTVALVE IS 2" X 2" X 1-1/4" DEEP THIS LEVELING VALVE CAN BE USED ON THE LEFT OR RIGHT SIDE, OR CAN BE USED TO CONTROL TWO AIR BAGS. MAINTAINS DESIRED RIDE HEIGHT WITH INCREASED OR DECREASED LOADS. This valve has 4 ports, 1 inlet, 1 exhaust, and 2 out to air bags The 52321 SERIES Air Suspension Valve utilizes Barksdale’s patented Shear-Seal® technology to accurately control suspension height in commercial and recreational vehicle applications. Shear-Seal® has become the industry leader through superior performance and long life, even under the most demanding conditions. Barksdale height control valves feature proportional response. These features combine to minimize air consumption without the use of inaccurate and failure prone time delay elements found in competing products. The Barksdale valve’s compact design make it a perfect fit on any suspension. Applications: Tractor - Primary Suspension, Cab Suspension, Front Suspension Trailer, Bus, RV Shear-Seal® Technology provides superior performance and durability. Precise dead band optimizes ride height control. Proportional flow reduces vehicle air consumption 120 or 350 l/min (4.2 to12.4 CFM) peak flow balances suspension response and air use. Dual outlet ports for simplified hose routings. Compact size and flexible design fits any application. Seal Type Shear-Seal®. Operating Pressure 130 PSI (9 bar) Maximum. OperatingTemperature -40ºF to +150ºF (-40ºC to +65ºC). *DOT approved Dual delivery ports (BAG PORTS). Mounting Studs 1/4-20 UNF. Linkage Mounting Hole 1/4". Maximum Handle Movement +/- 75º For fill or exhaust Materials Of Construction: Body: Anodize aluminum Housing: Engineered plastics Arm: Zinc plated steel InteRnal Elements: Stainless steel and hard anodized aluminum Seals: Buna-N NPT (National Pipe Taper) is the accepted industry designation for pipe size fittings, not the actual measured size. To determine the NPT size for an engine anode’s brass plug, measure the outside diameter (OD) of the threaded section of the plug then select the corresponding NPT size. For example, if a plug’s thread OD measures around 1/2", the corresponding NPT size is 1/4". OD of Threads of Plug 3/8" 1/2" 5/8" 3/4" 1" 1-3/8" 1-5/8" NPT Size of Plug 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" $17.00 SHIPPING TO CANADA & $5.00 EACH ADDITIONALINTERNATIONAL SHIPPING $23.00 & $7.00 EACH ADDITIONAL

Price: 29.51 USD

Location: GlowBal Supplies

End Time: 2024-12-09T18:32:45.000Z

Shipping Cost: 0 USD