10Pcs MH-SR602 Mini Infrared PIR Motion Sensor Pyroelectric Detector Module

Description: Description: Human body pyroelectric infrared sensor module, Model: SR-602 Response distance: up to 5 m; 0-3.5 m recommended Output: high level, H = 3.3 V, L = 0 V DC power supply: 3.3 V-15 V Quiescent current: 20uA Features and uses: This module has high sensitivity, fast response, small static power consumption, small size, easy to install and install. The lens, pin connector was soldered, and the power supply is provided without debugging. Can be used to illuminate the body sensor, alarm, security, Access control on request, automatic equipment for agriculture, forestry and mining. Key points: 1. high output time of this product is adjustable, from 2.5 seconds to 1 hour, the output time at the factory. It is 2.5 seconds and you can change one chip resistor if you need to change it. Pl10Pcs MH-SR602 Mini Infrared PIR Motion Sensor Pyroelectric Detector Module10Pcs MH-SR602 Mini Infrared PIR Motion Sensor Pyroelectric Detector Module Description:Human body pyroelectric infrared sensor module, Model: SR-602Response distance: up to 5 m; 0-3.5 m recommendedOutput: high level, H = 3.3 V, L = 0 VDC power supply: 3.3 V-15 VQuiescent current: 20uAFeatures and uses:This module has high sensitivity, fast response, small static power consumption, small size, easy to install and install.The lens, pin connector was soldered, and the power supply is provided without debugging. Can be used to illuminate the body sensor, alarm, security,Access control on request, automatic equipment for agriculture, forestry and mining.Key points:1. high output time of this product is adjustable, from 2.5 seconds to 1 hour, the output time at the factory.It is 2.5 seconds and you can change one chip resistor if you need to change it. Please read the resistance value corresponding to the typical delay time.See Related Form below.2. blocking time, 2 seconds, is not adjustable.3. A plant is defined as a repeatable trigger and cannot be changed.4. The power supply voltage of this module is from 3.3 V to 15 V in, and the limiting voltage is from 2.8 V to 18 V.5. Module output time: high output within 2 seconds after power on, then go low, enter standby modeStatus. If the delay time is changed, the time when the module outputs a high level after power on will increase accordingly, which can be understood asStartup time after entering the normal operating state after increasing the electrical power.6. After installing the Photosensitive element, it does not work during the day, works at night, does not contain photosensitive components, and works all day (There are no photodiodes on the module, if necessary, purchase separately. Recommended: a regular F3 photodiode)It is believed that the photosensitive element is not installed.7. This module is very sensitive, pay attention to the installation position, try to avoid the source of heat radiation (air outlet / direct sunlight)8. The sensitivity of this module is adjustable, and you must change the chip resistor. Please see the table below for details.Grid.9. When soldering with a conventional 220 V soldering iron, it is necessary to disconnect the power source before welding. It is recommended to use24 V low voltage soldering iron, such as 936 internal white light.10. If you follow the MCU and connect the lamp, please read the control circuit diagram below.Adjustment time delay instructionsThis module can achieve various delays by changing the delay time to adjust the resistance of the resistor.Time.The default delay for this module is 2.5 s. The above table is the data measured by the laboratory and having oneThe indicated error is only a reference to the range of debug time. If you need to change the delay time, please combine, in case of actual use, select the appropriate parameters after debugging a specific circuit.Control scheme of testing and applicationPackage Included:10 x MH-SR602 Motion Sensor PaymentShippingDelivery timeReturn PolicyContact usPaymentPlease kindly make payment asap, so that we can arrange your order promtly. If you have any problem with payment, please feel free to contact us. ShippingWe provide tracking number for ALL orders. You can track your parcels. Delivery timeNormally it arrives in 10-15 business days to US and European countries. DHL /Fedex/UPS arrives in 7-8 business days. Return Policy1.All products are eligible for 30-days money back guarantee. 2.All returns should be guided by us. Please contact us for details before you return anything. Contact usPlease don't hasitate to contact us BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.We accept dropshipping, bulk orders and customized products. We are selling forArduino module, sensors, Nextion display and other oled or lcd screens. lidar range finder sensors, servo motors, various electronic components and for legoled, ect.

Price: 14.98 USD

Location: Shenzhen

End Time: 2025-01-02T11:11:55.000Z

Shipping Cost: 0 USD