010-12970-00 For Panoptix LiveScope Transducer Perspective Mode Mount

Description: HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackCatalogueOtherFuel and Oil SystemSuspension PartsHeat/Flame protectionCar Electronic PartsExhaust RelatedEngine RelatedWastegateBelt PulleyEngine CoverEngine AccessoriesBrakesShort ShifterGauges/Gauge SetsAccessoriesIntercooler and pipingSteering WheelsLines and FittingsExterior AccessoriesCar Interior Part010-12970-00 For Panoptix LiveScope Transducer Perspective Mode MountItem Description:100% quality assurance tested, more responsive, less expensive, easier to install.Attach the Livescope LVS32 transducer (not included) to this mount to add an overhead sonar view.Easily mount to your trolling motor, adjust the transducer to fit your fishing style.The estimated installation time is 15 minutes.1 mount & 3 views: Forward, Down, and Perspective modes.Gives you real-time images of what's all around and ahead of your boat plus an overhead view for shallow water.Built-in attitude heading reference system(AHRS) keeps sonar view stable, even in rough conditions.Made of high-quality materials, it can adapt to liquid environments with different acidity and alkalinity such as seawater.Part Number: 010-12970-00, 0101297000.Installation Steps：Install the Shaft Bracket on the Trolling Motor Shaft:1．Position the bracket on the shaft so the arrows point up. 2．The bracket should be aligned so the center screw hole faces the front of the trolling motor.3．Select an option to align either the "P" or "S" notch on the bracket with the center of the trolling motor:4．Use the hex wrench and the M6 screws to attach the two halves of the bracket around the trolling motor shaft.Attaching the Extension Arm to the Transducer:1．Using the included hex wrench, attach the transducer to the long side of the extension arm1 using the shoulder screw2, flat washer3, and rubber washer4.2．Fully tighten the shoulder screw to secure the extension arm to the transducer.Attaching the Transducer to the Shaft Bracket:1．Using the hex wrench, attach the shorter part of the extension arm1 to the shaft bracket2 using the shoulder screw3, flat washer4, and rubber washer5.2．Fully tighten the shoulder screw to secure the extension arm to the shaft bracket.3．Secure the transducer cable to the shaft or to another secure location. Fitment:Perfect fit for scouting and fishing in shallow water.For Panoptix LVS32 Transducer.For GPSMAP 8400/8600 Series MFDs.For GPSMAP 7400/7600, 1002/1202.For GPSMAP 1202/1202xsv Touch.For GPSMAP 702/902 Series chartplotters.For GPSMAP X2 Plus Series.For GPSMAP ECHOMAP Plus 70cv/70sv.For GPSMAP ECHOMAP UHD. For GPSMAP 90sv chartplotter/sonar combo series.Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs. Material & Color:Material: Made of plastic and aluminum alloy.Color: as picture. Package Included:1x Transducer Mounting Hardware(100% Brand New Never Used Or Installed). Note:Provide Tracking Number With Every Order, Please Buy With Confidence!No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.Will come with everything you see in the picture. Please allow difference due to manual measurement.Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.For any inquiries or special requests such as larger amount ordering please write to us.PaymentDelivery detailsFeedbackAbout usContact usPaymentDelivery detailsFeedbackAbout usWe are a company founded in 2012, focusing on the production and sales of Auto- parts. Our products are very popular in America and Europe. Our price is very competitive and our products are of good quality. If you need wholesale, please contact me, we will give you a more appropriate price. Contact us

Price: 15.9 USD

Location: Perth Amboy, New Jersey

End Time: 2024-12-22T07:54:22.000Z

Shipping Cost: 0 USD